No will need to reinstall the technique! It is actually extremely straightforward to open the AHCI m

Recently, I just changed the great product motherboard, and identified that the SATA tough disk functions in IDE mode just after installation. Originally intended to use the approach of modifying the registry to solve this problem. But after reading some facts on the internet, I identified that the original Win10 technique doesn't need to modify the registry, and can also modify the SATA tough disk working mode from IDE to AHCI. (The premise will not be to reinstall the operating technique.) For the reason that I've not applied this technique before, let's actually encounter it under.

The test platform just changed, the tough disk is Apacer TurboIIISeries-AS710, SATA3.0 interface.

The way to verify the operating mode from the difficult disk you use? The method is extremely very simple, initial enter the BIOS, verify the SATA challenging disk functioning mode. The second is to make use of the ASSSDBenchmark computer software. If the word “OK” is displayed inside the red box within the upper left corner with the application, it means that the hard disk works in AHCI mode. If the word “BAD” is displayed, it means that the challenging disk works in IDE mode.

usb data recovery software free download are all SATA interfaces. SATA tough drives can operate in IDE or AHCI mode. Naturally, the efficiency of AHCI mode is considerably larger than that of IED mode. To turn on AHCI mode, you should turn around the BIOS. When you are installing Win10 program The AHCI mode has not been turned on in the BIOS ahead of. Then the Win10 method will function in IDE mode, which will considerably influence the function efficiency of your hard disk. In recover formatted files isn't turned on in AHCI mode, the performance impact will be greater.

In the event the BIOS is straight changed to AHCI mode right after the program is installed, it will cause the system to fail to start (as shown in the figure above), so how can we usually turn on AHCI mode?

Windows ten can transform the operating mode of SATA hard disk from IDE to AHCI without having modifying the registry:

Very first, add Win10 secure mode towards the technique boot menu, the specific operation method is as follows:

1. Press WIN+X then open the 'Control Panel'.

two. Opt for in turn: Handle Panel---All Control Panel Items---Power Options.

3. Select the function selection of the energy button.

4. Click 'Change the presently unavailable settings', and close the quick commence (turning off the fast start can be a prerequisite for restoring F8 into sophisticated startup); (Supplement: Although that is introduced on the web, in reality, in some cases it is feasible not to turn off the rapid commence . At the least within this experiment, the test platform I made use of will not need to close the quick start out, you may nevertheless press F8 to enter the advanced start selection.)

5. Press the [Win]+[X] shortcut important, choose the 'Command Prompt (Administrator)' selection inside the shortcut menu, enter 'bcdedit/setdefaultbootmenupolicylegacy' in the English state and press Enter.

6. Restart the personal computer, press F8 right after booting, you'll be able to see the regular safe mode solutions.

7. Right after confirming that the safe mode can be entered typically, restart the pc, discover the tough disk controller mode setting alternative inside the BIOS (look for the setting solutions containing the words SATA, IDE, AHCI), and alter the hard disk mode from IDE to AHCI.

eight. Save the alterations and restart the computer. Please note which you need to enter safe mode initial!

9. Following successfully getting into secure mode, restart the computer system and choose normal startup. Beneath regular circumstances, it can be ordinarily began. At this point, the switch of your challenging disk mode from IDE to AHCI is completed.

At this time, make use of the ASSSDBenchmark software program to view, you can see that the 'iaStorA-OK' is displayed inside the red box within the upper left corner of the software program, indicating that the difficult disk has been operating in AHCI mode at this time.